AL3000-03 Cutubka Daawaynta Isha Hawada Culayska Qalabka Hawada Saliida Fog Pneumatic Qaybaha Duubista Hawada
Feejignaanta Xulashada
1. Sidee loo doortaa shaandhada iyadoo loo eegayo xaddiga socodka?
Si loo go'aamiyo shaandhada saxda ah ee qadarka qulqulka, waa in la tixraacaa miiska socodka oo dooro shaandhada wax yar ka weyn isticmaalka hawada ee qalabka hoose.Tani waxay hubinaysaa in ay jiri doonto sahay ku filan hawo iyada oo laga fogaanayo qashinka aan loo baahnayn in uu yeesho heer aad u sarreeya.
| Qaabka processor-ka isha hawada | Dunta Interface | Socodka |
| AC2000/AFC2000 | 1/4 = 2 " | 500L/daqiiqo |
| AR/AFR/AF/AL2000 | 1/4 = 2 " | 500L/daqiiqo |
| BC/BFC/BF/BR/BFR/BL2000 | 1/4 = 2 " | 2000L/daqiiqo |
| BC/BFC/BF/BR/BFR/BL3000 | 3/8=3″ | 3000L/daqiiqo |
| BC/BFC/BF/BR/BFR/BL4000 | 1/2=4″ | 4000L/daqiiqo |
2. Waa maxay saxsanaanta shaandhada loo doortaa qaybta shaandhada?
Dhexroorka daloolka shaandhada shaandhada ayaa go'aamisa saxnaanta sifaynta shaandhada.Sababtoo ah qalabka hoose wuxuu leeyahay shuruudo kala duwan oo loogu talagalay tayada isha gaaska.Tusaale ahaan, biraha, birta iyo warshadaha kale ma laha shuruudo sare oo tayada gaaska ah, sidaas darteed waxaad dooran kartaa shaandhada leh cabbirka daloolka shaandhada weyn.Si kastaba ha noqotee, warshadaha sida daawada iyo elektiroonigga ayaa leh shuruudo sare oo tayada gaaska ah.Waxaan dooran karnaa filtarrada saxda ah oo leh dalool shaandheyn aad u yar.
3. Sidee loo doortaa habka biyo-mareenka?
Nidaamka dheecaanka ee processor-ka isha hawogu waxa uu ka kooban yahay dareere toos ah, shuban cadaadis kala duwan iyo daadin gacanta.Dheecaan otomaatig ah ayaa loo sii kala qaybin karaa laba nooc: furin aan cadaadis lahayn iyo xidhid la'aan cadaadis.Dheecaannada cadaadiska kala duwan waxay inta badan ku xiran tahay lumitaanka cadaadiska hawlgelinta.
Marka ay timaaddo munaasabadaha isticmaalka, daadinta otomaatiga ah ayaa aad ugu habboon meelaha aysan si fudud u heli karin dadka sida meelaha sare ama cidhiidhiga ah;halkaasoo gaaska aan la jari karin dhuumaha hoose.Dhanka kale, dheecaanka cadaadiska kala duwani wuxuu ku habboon yahay meelaha la kantarooli karo ee u dhow miiska shaqada oo leh gaas la hakiyey dhamaadka dhuumaha.
4. Saddex hab oo biyo-mareenno ah oo kala duwan
Buuxinta gacanta: Ku leexi madaxa caaga ah ee koobka biyaha ilaa "0" booska si aad u daadiso.
Marka la dhammeeyo, dib ugu rog jihada "S"
Biyo-bax toos ah:Marka ay korodho heerka biyaha koobka, piston ayaa si toos ah kor ugu qaadi doonta si uu u bilaabo daadinta.Dheecaannada cadaadiska kala duwan
Tilmaamid
| Cadaadiska caddaynta | 1.5Mpa{15.3kgf/cm²} |
| Max.cadaadiska shaqada | 1.0Mpa (10.2kgf/cm²} |
| Deegaanka iyo heerkulka dareeraha | 5 ~ 60℃ |
| Kala shaandhee daloolka | 5μm |
| Saliid soo jeedi | SOVG32 Turbine 1 saliid |
| Wax koob | Polycarbonate |
| daboolka koobka | AC1000-2000 oo aan lahaynAC3000-5000 wata (lron) |
| Kala duwanaanshaha xakamaynta cadaadiska | AC1000:0.05-0.7Mpa(0.51-7.1kgf/cm²)AC2000~5000:0.05~0.85Mpa(0.51~8.7kgf/cm²) |
Fiiro gaar ah: waxaa jira 2,10,20,40,70.100μm si loo doorto
| Qaabka | Tilmaamid | ||||
| Socodka shaqada ugu yar | Socodka la qiimeeyay (L/min) | Cabbirka dekedda | Awooda koobka | Miisaanka | |
| AC1000-M5 | 4 | 95 | M5x0.8 | 7 | 0.07 |
| AC2000-02 | 15 | 800 | 1/4 | 25 | 0.22 |
| AC3000-02 | 30 | 1700 | 1/4 | 50 | 0.30 |
| AC3000-03 | 40 | 5000 | 3/8 | 50 | 0.30 |
| AC4000-03 | 40 | 5000 | 3/8 | 130 | 0.56 |
| AC4000-04 | 50 | 5000 | 1/2 | 130 | 0.56 |
| AC4000-06 | 50 | 6300 | 3/4 | 130 | 0.58 |
| AC5000-06 | 190 | 7000 | 3/4 | 130 | 1.08 |
| AC5000-10 | 190 | 7000 | 1 | 130 | 1.08 |
